Choose a Location
When picking an outdoor spot for your Ring camera, consider the camera’s field of view and range. You want a location that will enable the camera to capture as much of your property as needed. Some ideal spots include above the front door, overlooking the driveway, above the garage, or near a backyard entrance. Choose a location that is elevated, stable, and faces the area you want to monitor.
Mount the Camera Base
Ring cameras come with the necessary mounting hardware in the box. You will need to attach the base plate to the wall where you want to install the camera. Hold the base plate against the wall and use a pencil to mark the holes. Use a drill to drill pilot holes, then use the included screws to mount the base plate. Make sure it is mounted securely.
Attach the Camera
Once the base plate is installed, attach the magnetic camera mount. The camera uses a magnetic connection to attach to the base plate for easy install and removal. Position the camera mount and magnetically connect it to the base plate. You can adjust the camera angle by rotating the magnetic mount once it is attached.
Connect Power
Outdoor Ring cameras are battery powered, so you need to connect the included rechargeable battery pack. The battery pack slides into the bottom of the camera mount. Once in place, the camera will power on automatically. Fully charged, the battery can provide several months of power before needing to be recharged.
Connect to Wi-Fi
With the camera powered on, you can now connect it to your Wi-Fi network. This allows you to view live feeds and receive motion alerts on your mobile devices. Open the Ring app, select Set Up a Device, and follow the on-screen instructions to connect the camera to your Wi-Fi network. The camera needs to be within range of your router’s Wi-Fi signal in order to connect successfully.
Position and Adjust Camera Angle
With everything connected, you can now position and adjust the angle of your Ring camera to ensure you get a comprehensive field of view. Twist the magnetic mount until the live view in the Ring app shows exactly what you want to monitor. Adjust the angle up, down, left or right as needed.
Enable Motion Alerts
In the Ring app, you can customize motion detection settings and enable motion alerts. This allows the camera to send notifications to your phone whenever movement is detected. Adjust the motion zones and sensitivity as needed. Make sure you position the camera angle to best capture motion in areas of interest.
Installing a Ring camera outdoors takes a bit of work, but following these simple steps allows you to mount it securely, power it, connect it to Wi-Fi, adjust the angle, and enable motion alerts. With an outdoor Ring camera properly set up, you’ll be able to monitor your property with ease.
Frequently Asked Questions About Installing a Ring Camera Outdoors
How do I get power to my outdoor Ring camera?
Ring outdoor cameras come with a rechargeable battery pack that provides several months of battery life before needing to be recharged. No wiring is required. Simply charge up the battery and slide it into the camera mount.
Does the Ring camera need to be connected to my Wi-Fi?
Yes, in order for you to get live views and motion alerts from your Ring outdoor camera, it must be connected to your Wi-Fi network. The camera connects directly to your Wi-Fi router via the Ring app during setup.
How do I mount the base plate to stucco, vinyl, or brick?
You can use the included screws and anchors to mount the base plate directly to stucco, vinyl siding, or brick. For brick, drill pilot holes and use plastic anchors. For stucco or vinyl, drill pilot holes and use the screws directly.
How tight should the Ring camera mount connection be?
The magnetic camera mount should be firmly attached but don’t over tighten it. It just needs to be tight enough to support the weight of the camera while still allowing you to adjust the angle with some effort. Over tightening can damage the mount.
Can I connect multiple outdoor Ring cameras?
Yes, the Ring app supports connecting multiple Ring cameras to your account. You can mix and match indoor and outdoor cameras, enabling you to monitor both inside and outside areas of your home.
Does Ring Camera outdoor have Night Vision?
Yes, Ring outdoor cameras include infrared night vision that allows clear black and white video even in low or no light conditions. The night vision has a range of up to 30 feet in ideal conditions.
Conclusion
Installing an outdoor Ring camera takes a bit of preparation and physical effort, but the benefits for home security make it well worth it. By following this guide on choosing a location, mounting the base, attaching the camera, connecting power, getting it on Wi-Fi, adjusting the angle, and enabling motion alerts, you can set up your outdoor Ring camera properly. With your Ring camera keeping watch outdoors, you’ll have peace of mind knowing you can check in anytime from your phone. Outdoor security cameras act as an extra set of eyes on your property so you can monitor activity and get notified instantly when something happens.